 |
Cal-Royal
CR441 Series
Door Closer
25 Year Warranty / UL Listed |
 |
- Universal application.
Non-handed for standard, top-jamb or
parallel arm installation
- Non-sized, 1 thru 6.
FACTORY PRESET SIZE 3 meets ADA
- Standard adjustable back
check function
- Adjustable closing and
latching speed by two separate regulating
valves
- Optional adjustable
delayed action (DA)
Preset at the factory for approximately 20
seconds, between 70° and 0°. Delay time
easily adjusted up to 1 minute. CR441 DA
- Standard full plastic
cover
- Self tapping screws and
closer gauge for easy adjustment is standard
feature
|
|
- Parallel hold-open
adjustable arm (Non-handed). CR3049HO
- Non-handed forged solid
steel parallel arm for extra abusive
installations. CR3077HDAR
- Optional, non-handed
parallel arm features solid forged steel
main arm and forearm with stop in softfit
shoe. CR3077SPAS
- Optional non-handed
parallel arm features solid forged steel
main arm and forearm provides hold-open
function with templated stop/hold-open
points. Handle controls hold-open function.
CR3049HOSRPS
- Drop plate used where top
rail is less than 3 3/4". CR18
- Drop plate for top jamb
where face is less than 3 1/2". CR18TJ
- Drop plate for top jamb
mounted closer flush with top of head frame
face in flush ceiling condition. Plate
requires 1 3/4" minimum head frame. CR18G
- Drop plate for parallel
arm mounting top rail is less than 5 1/2"
measured from stop. Plate requires 2"
minimum top rail. CR18PA
- Available in Alum, Duro,
Gold, US3, 26 and other plated finishes
- Optional Metal cover.
|
|
Choose a Model & Finish, and enter the quantity !
|
Item#
|
Description
|
Finishes
|
Price |
Qty
|
Add
to
your Order!
|
|
Cal Royal
CR441
Door Closer |
|
|
Cal Royal
CR441DA
Door Closer |
|
|
PLATED FINISH
|
Cal Royal
CR441
Door Closer |
|
|
Cal Royal
CR441DA
Door Closer |
|
|
Parts & Accessories
|
|
Cal Royal
CR3049HO
Arm |
|
|
|
Cal Royal
CR3077SPAS
Arm |
|
|
|
Cal Royal
CR3049HOSRPS
Arm |
|
|
Drop plate for
parallel arm mounting top rail is less than 5-1/2" measured from stop.
Plate requires minimum 2" top rail. |
CR18PA
 |
|
|
Drop plate used where top rail is less than 3-3/4". |
CR18
|
|
|
Drop plate used where
top rail is less than 3-1/2". |
CR18TJ
|
|
|
Drop plate for top jamb
mounted closer flush with top of head frame face in flush ceiling
condition. Plate requires 1-3/4" minimum head frame. |
CR18G
|
|
|
|
IMPORTANT Any door
closer, including those certified by BHMA to conform to ANSI
Standard A156.4, that is chosen, installed and adjusted based on ADA
or other reduced opening force requirement may not provide
sufficient power to close and latch a door. Location of door could
also affect action and efficiency of door closer. |
 |
Door Width |
36" |
42" |
48" |
| **8.5 lbs. |
CR441 |
CR441 |
CR441 |
| **5.0 lbs. |
CR441 |
CR441 |
CR441 |
** Maximum
Opening Force
|
|
| Description
|
Size
|
 |
| A. Length of Closer
Body |
11" |
| B. Horizontal
Mounting Holes |
5" |
| C. Vertical Mounting
Holes |
1" |
| D. Width of Closer
Body |
2 3/4" |
| E. Projection from
Door |
|
|
|
Closing power
of CR441 Series closers may be adjusted 50%.
Shows recommended range of door width for closer
size. |
|
|
|
Cal-Royal |
LCN |
Dorma |
Corbin |
Norton |
Russwin |
Sargent |
Yale |
|
CR441 |
4041 |
7800fCOV/
7600FCOV |
DC2200 |
7500 |
2820K |
1230 |
4400 |
|
| The data on
this chart represents our judgment of which are most similar.
Since no product is exactly alike the information has been
obtained from trade sources. It is not guaranteed nor
represented that any specific product exactly equals any other
product. Door closer body size may be different. |
|
