Detex
 



EAX-500
Battery Powered, Surface/Flush Mount Exit Alarm

 

 

The EAX-500 is designed for applications that require an alarmed exit device on secured doors.  The alarm, with approximately 100dB, will sound when someone attempts an unauthorized exit.  The EAX-500, with it's redesigned shape and smaller size make it the choice for quick and easy installations on emergency exit and restricted doors.

 

DETEX
EAX-500
 Battery Powered, Surface/Flush Mount Exit Alarm
(cylinder needed to operate the alarm)

Select:

 

 

 

Features and Benefits:

  • Low-cost, self-contained door alarm with piezo horn that sounds to warn of unauthorized use of a door
  • Surface door mount only.  Easy to install using ordinary tools.
  • Patented plastic template allows for foolproof alignment of internal magnetic door contact and an accurate installation
  • Now available with field selectable options
  • Tapered cover allows for installation on narrow stile doors, 2" minimum
  • An intelligent circuit that automatically senses the "handing" of the alarm location on the door
  • Available in 2 colors, gray and black
  • Patented cam assembly automatically adjusts for different sizes of cylinders without the use of spacers
  • Mortise cylinder required with standard Yale cam for IKC
  • Alarm can only be silenced by proper control key
  • Modern graphics on cover to demonstrate key rotation and operation
  • Improved electronic circuits for longer battery life, LED functions
  • Tamper resistant housing with cover lock, protects electronics and battery from manipulation
  • Extended bypass allows alarm to remain bypassed when door is open and automatically rearm upon door closing
  • Custom settings may be ordered and programmed at the factory
  • Extended bypass now a standard feature - user may deactivate if necessary
  • Rim cylinder required for OKC
  • In-swinging door applications with use of P/N 102643
  • Upgraded features are now included and field selectable

Packaging Information:

  • The EAX-500 package includes: EAX-500 Exit Alarm,  Peel & stick door sign, Magnetic door frame sensor, Key Stop (formerly 90 degree detent), and Plastic Template

 

Technical Specifications :
  • Approximate 100dB piezo alarm - Mortise cylinder key switch arming - 9 VDC battery -  powered - Low Battery Alert - Manual arming, disarming & rearming - LED visual arming indicators - Audible arming indicators - Outside Key Control compatible - Fits 2" narrow stile doors - Alarm accepts 5, 6 and 7 pin standard and interchangeable core mortise cylinders with a standard Yale cam - Field selectable 2-minute auto rearm - Field selectable status indicators - Field deactivation of extended bypass

 

Physical Specifications:
 

 

Dimensions:  2.10" Wide x 2.375" Deep x 7.70" Long

Auxiliary Door Signage:

Red and white pressure-sensitive sign reading "Emergency Exit/Alarm Will Sound" supplied with each unit

Operation

  • light will illuminate for 15 seconds during the arming sequence followed by 3 chirps indicating the alarm is armed.
  • TO DISARM: Insert and rotate the key clockwise until the red LED flashes twice, remove key.  The red LED will flash twice periodically indicating the unit is disarmed.

Detex Limited Warranty:

Comes with Detex's standard one year limited warranty. The EAX-500 Series Exit Alarm is warranted to be free of defects in material and workmanship when properly installed, used and maintained according to instructions. We will, for a period of one year from the date of purchase, repair or replace any part which, upon our examination, proves to be defective under normal use. This does not apply to batteries or to damage from battery leakage. This warranty will be honored upon presentation of proof that the product covered thereby was purchased directly from an authorized Detex distributor. We shall not be liable for any direct, incidental or consequential loss or damage arising out of the failure of this device.

 

Home  Quotes  View Order  Shipping  Contact Us

   Copyright © 1999 Locksearch.com All Rights Reserved