|
COR Series Bar Coordinators
• The COR Series
Coordinators are designed for use on pairs of doors when
one door needs to close before the other.
• All COR units function easily. The active door lever,
located nearest to the active stop, holds the active
door open until the trigger mechanism is released by the
closing of the inactive leaf.
• All COR units are equipped with an override feature
which allows the active door to close under extreme
pressure.
• All COR units are compatible with Flush Bolts.
• The COR Series is available in five sizes for variable
door opening widths.
• The COR Series does not cover the entire length of the
stop, so a filler bar can be provided to maintain
architecturally clean lines.
• COR Series Coordinator Channels and fillers are made
of aluminum and are normally furnished in a US28 finish.
Also available in US26D, and 315AN (Black).
• Meets ANSI/BHMA A156.3, Type 21A.
• UL Listed for installation on labeled frame.
• Optional Filler Bars: FL20, FL32 and FL44, available
to maintain clean line.
• Optional Mounting Brackets available: MB1, MB2, MB1F,
MB2F, MB3F, MB1V, MB2V, and MB3V for other stop applied
hardware.
For Openings Where Doors Are Unequal Size
The coordinator length should equal the active door
width plus approximately 1/2 the inactive door width.
The coordinator must be 6" longer than the active door width and shorter
than the overall frame
opening between stops.
|
