Order Ives Hardware: Buy Ives Hardware Online, Door Knockers, Door Bumpers, Holders, Crash Stops, Angle Stops, Push Plates, Pull Plates, Latches, Catches, Surface Bolts

Select type of Exterior Hardware !

House Numbers	Lock Guards
Viewers	Letter Box Plates
Door Knockers	Crash Stops

DOOR KNOCKERS

763 Door Knocker with Number Plate, Optional Viewer

763 Knocker
• Knocker made from solid brass.
• Factory-engraved number plates available. White numerals and/or
letters, maximum of 7, engraved on mahogany-grained plastic plate.
When ordering, specify “E” prefix and engraving requirements.
• Conforms to ANSI/BHMA A156.16 L23151.
• Packed with sheet metal screws.
• Knocker Finishes: B3, B4, B5, B10, B10B, B14, B15, B15A, B26, B26D.

U763 x U700 Knocker with Viewer
• 120° Angle of View.
• For doors 1-3/8" to 2-1/16" thick.
• Secure, tamper-resistant.
• Solid brass body; glass lens.
• Simple installation—only a 1/2" hole required.
• Suggested installation height: 60" from floor.
• Trim washer available, 3/4" x .032" thick.
• U700 is UL Listed for use on fire door assemblies rated at 90 minutes.
• Conforms to ANSI/BHMA A156.16 L23173 (700, U700) and L23222 (U700).
• Finishes: B4, B26D.

Dimensions:
Knocker Dimensions:
Length: 4"
Width: 2-3/16"
Projection: 9/16"
Mounting Hole Center-to-Center: 3-7/32"

764 Door Knocker with Number Plate/Card Holder, Optional Viewer

764 Knocker
• Knocker made from solid brass.
• Factory-engraved number plates available. White numerals and/or
letters, maximum of 7, engraved on mahogany-grained plastic plate.
When ordering, specify “E” prefix and engraving requirements.
• Conforms to ANSI/BHMA A156.16 L23151.
• Packed with sheet metal screws.
• Knocker Finishes: B3, B4, B5, B10, B10B, B14, B15, B15A, B26, B26D.

U764 x U700 Knocker with Viewer
• 120° Angle of View.
• For doors 1-3/8" to 2-1/16" thick.
• Secure, tamper-resistant.
• Solid brass body; glass lens.
• Simple installation—only a 1/2" hole required.
• Suggested installation height: 60" from floor.
• Trim washer available, 3/4" x .032" thick.
• U700 is UL Listed for use on fire door assemblies rated at 90 minutes.
• Conforms to ANSI/BHMA A156.16 L23173 (700, U700) and L23222 (U700).
• Finishes: B4, B26D.

Dimensions:
Knocker Dimensions:
Length: 4-15/16"
Width: 2-3/16"
Projection: 9/16"
Mounting Hole Center-to-Center:
3-7/32"

771 Door Knocker with U696/U698/U700 Viewer

771 Knocker Only
• Knocker made from solid brass.
• Mounting screws concealed. Packed with sheet metal screws.
• Conforms to ANSI/BHMA A156.16 L23151.
• Knocker Finishes: B3, B5, B10, B26, B26D.
• U696 and U700 Viewers supplied in B4 or B26D.
U698 Viewer supplied in B3 or B26D.

U771 x U696 Knocker with Viewer
• 150° Angle of View.
• For doors 1-3/8" to 2-1/16" thick.
• Secure, tamper-resistant.
• Solid brass body; glass lens.
• Simple installation — only a 1/2" hole required.
• Suggested installation height: 60" from floor.
• Trim washer available, 3/4" x .032" thick.
• UL Listed for use on fire door assemblies rated at 90 minutes.
• Conforms to ANSI/BHMA L23172 and L23222.
• Finishes: B4, B26D.

U771 x U698 Knocker with Viewer
• 190° Angle of View.
• Lens projects 1/4" from face of door.
• 4 optical glass lenses.
• For doors 1-3/8" to 2-1/8" thick.
• Solid brass body and barrel.
• Simple installation — only a 9/16" hole required.
• Suggested installation height: 60" from floor.
• U698 is UL Listed for use on fire door assemblies rated at 90 minutes.
• Conforms to ANSI/BHMA A156.16 L23172 and L23222.
• Finishes: B3, B26D.

U771 x U700 Knocker with Viewer
• U700 For doors 1-3/8" to 2-1/16" thick.
• 120° Angle of View.
• Secure, tamper-resistant.
• Solid brass body; glass lens.
• Simple installation—only a 1/2" hole required.
• Suggested installation height: 60" from floor.
• Trim washer available, 3/4" x .032" thick.
• U700 is UL Listed for use on fire door assemblies rated at 90 minutes.
• Conforms to ANSI/BHMA A156.16 L23173 (700, U700) and L2322 (U700).
• Finishes: B4, B26D.

Dimensions:
Length: 3-1/8"
Width: 2-1/8"
Projection: 1/2"
Mounting Hole Center-to-Center:
2-1/4"

774 Door Knocker with Number Plate, Card Holder and Optional U698/U700/U701 Viewer

774 Knocker Only
• Knocker made from solid brass.
• Factory-engraved number plates available. White numerals and/or
letters, maximum of 7, engraved on mahogany-grained plastic plate.
When ordering, specify “E” prefix and engraving requirements.
• Mounting screws concealed. Packed with sheet metal screws.
• Conforms to ANSI/BHMA A156.16 L23151.
• Knocker Finishes: B3, B4, B5, B10, B10B, B14, B15, B15A, B26D.
• U698 Viewer supplied in B3 or B26D.
U700 and U701 Viewers supplied in B4 or B26D.

U774 x U698 Knocker with Viewer
• 190° Angle of View.
• Lens projects 1/4" from face of door.
• 4 optical glass lenses.
• For doors 1-3/8" to 2-1/8" thick.
• Solid brass body and barrel.
• Simple installation — only a 9/16" hole required.
• Suggested installation height: 60" from floor.
• U698 is UL Listed for use on fire door assemblies rated at 90 minutes.
• Conforms to ANSI/BHMA A156.16 L23172 and L23222.
• Finishes: B3, B26D.

U774 x U700, U771 x U701 Knocker with Viewer

• U700 For doors 1-3/8" to 2-1/16" thick.
• U701 For doors 2-1/8" to 2-5/8" thick.
• 120° Angle of View.
• Secure, tamper-resistant.
• Solid brass body; glass lens.
• Simple installation—only a 1/2" hole required.
• Suggested installation height: 60" from floor.
• Trim washer available, 3/4" x .032" thick.
• U700, U701 is UL Listed for use on fire door assemblies rated at 90 minutes.
• Conforms to ANSI/BHMA A156.16 L23173 (700, U700) and L2322 (U700).
• Finishes: B4, B26D.

Dimensions:
Length: 4-3/16"
Width: 2-3/16"
Projection: 1/2"
Mounting Hole Center-to-Center: 2-1/4"

Door Knocker with Optional Viewers

02-3100 Knocker only
• Knocker made from forged brass.
• Knocker Finishes: 605, 606, 609, 612, 613, 618, 619, 620, 625, 626.
• Viewers supplied in B4 or B26D.

02-31001 Knocker with 700 Viewer
• 120° Angle of View.
•700 For doors 1-3/8" to 2-1/16" thick.
• Secure, tamper-resistant.
• Solid brass body; glass lens.
• Simple installation—only a 1/2" hole required.
• Suggested installation height: 60" from floor.
• Trim washer available, 3/4" x .032" thick.
• Conforms to ANSI/BHMA A156.16 L23173.
• Finishes: B4, B26D.

Knocker Dimensions:
Length: 7-1/16"
Width: 2-15/16"
Projection: 7/8"
Mounting Hole Center-to-Center: 4-15/16"

Door Knocker with Optional Viewers

02-3101 Knocker only
• Knocker made from forged brass.
• Knocker Finishes: 605, 606, 609, 612, 613, 618, 619, 620, 625, 626.
• Viewers supplied in B4 or B26D.

02-31012 Knocker with 701 Viewer
• 120° Angle of View.
•701 For doors 2-1/8" to 2-5/8" thick.
• Secure, tamper-resistant.
• Solid brass body; glass lens.
• Simple installation—only a 1/2" hole required.
• Suggested installation height: 60" from floor.
• Trim washer available, 3/4" x .032" thick.
• Conforms to ANSI/BHMA A156.16 L23173.
• Finishes: B4, B26D.

02-31011U Knocker with U700 Viewer
02-31012U Knocker with U701Viewer
• 120° Angle of View.
•U700 For doors 1-3/8" to 2-1/16" thick.
•U701 For doors 2-1/8" to 2-5/8" thick.
• Secure, tamper-resistant.
• Solid brass body; glass lens.
• Simple installation—only a 1/2" hole required.
• Suggested installation height: 60" from floor.
• Trim washer available, 3/4" x .032" thick.
• U700, U701 is UL Listed for use on fire door assemblies rated at 90 minutes.
• Conforms to ANSI/BHMA A156.16 L2322.
• Finishes: B4, B26D.

Knocker Dimensions:
Length: 6-11/16"
Width: 1-7/8"
Projection: 13/16"
Mounting Hole Center-to-Center: 5-7/8"

Door Knocker with Optional Viewers

02-3102 Knocker only
• Knocker made from forged brass.
• Knocker Finishes: 605, 606, 609, 612, 613, 618, 619, 620, 625, 626.
• Viewers supplied in B4 or B26D.

02-31021 Knocker with 700 Viewer
02-31022 Knocker with 701 Viewer
• 120° Angle of View.
•700 For doors 1-3/8" to 2-1/16" thick.
•701 For doors 2-1/8" to 2-5/8" thick.
• Secure, tamper-resistant.
• Solid brass body; glass lens.
• Simple installation—only a 1/2" hole required.
• Suggested installation height: 60" from floor.
• Trim washer available, 3/4" x .032" thick.
• Conforms to ANSI/BHMA A156.16 L23173.
• Finishes: B4, B26D.

02-31021U Knocker with U700 Viewer
02-31022U Knocker with U701Viewer
• 120° Angle of View.
•U700 For doors 1-3/8" to 2-1/16" thick.
•U701 For doors 2-1/8" to 2-5/8" thick.
• Secure, tamper-resistant.
• Solid brass body; glass lens.
• Simple installation—only a 1/2" hole required.
• Suggested installation height: 60" from floor.
• Trim washer available, 3/4" x .032" thick.
• U700, U701 is UL Listed for use on fire door assemblies rated at 90 minutes.
• Conforms to ANSI/BHMA A156.16 L2322.
• Finishes: B4, B26D.

Knocker Dimensions:
Length: 6-7/16"
Width: 2-15/16"
Projection: 15/16"
Mounting Hole Center-to-Center: 4-1/8"

Door Knocker with Optional Viewer, Magnetic Mounting

02-3107 Knocker only
02-3107MAG Magnetic Knocker
• Knocker made from forged brass.
• 2-3107 MAG features magnetic mounting on metal doors.
• Knocker Finishes, excluding magnetic: 605, 606, 609, 612, 613,
618, 619, 620, 625, 626.
• 02-3107MAG Finishes: 505, 605.
• Viewers supplied in B4 or B26D.

02-31072 Knocker with 701 Viewer
• 120° Angle of View.
•701 For doors 2-1/8" to 2-5/8" thick.
• Secure, tamper-resistant.
• Solid brass body; glass lens.
• Simple installation—only a 1/2" hole required.
• Suggested installation height: 60" from floor.
• Trim washer available, 3/4" x .032" thick.
• Conforms to ANSI/BHMA A156.16 L23173.
• Finishes: B4, B26D.

Knocker Dimensions:
Length: 8-1/2"
Width: 4-1/8"
Projection: 1"
Mounting Hole Center-to-Center: 5"

Door Knocker

02-3115 Knocker only
• Knocker made from forged brass.
• Knocker Finishes: 605, 606, 609, 612, 613, 618, 619, 620, 625, 626.

Dimensions:
Length: 7-3/4"
Width: 2"
Projection: 2-7/8"
Mounting Hole Center-to-Center: 5"

Door Knocker with Optional Viewers

02-3122 Knocker only
• Knocker made from wrought brass.
• Knocker Finishes: 605, 606, 609, 612, 613, 618, 619, 620, 625, 626.
• Viewers supplied in B4 or B26D.

02-31221 Knocker with 700 Viewer
02-31222 Knocker with 701 Viewer
• 120° Angle of View.
•700 For doors 1-3/8" to 2-1/16" thick.
•701 For doors 2-1/8" to 2-5/8" thick.
• Secure, tamper-resistant.
• Solid brass body; glass lens.
• Simple installation—only a 1/2" hole required.
• Suggested installation height: 60" from floor.
• Trim washer available, 3/4" x .032" thick.
• Conforms to ANSI/BHMA A156.16 L23173.
• Finishes: B4, B26D.

02-31221U Knocker with U700 Viewer
02-31222U Knocker with U701Viewer
• 120° Angle of View.
•U700 For doors 1-3/8" to 2-1/16" thick.
•U701 For doors 2-1/8" to 2-5/8" thick.
• Secure, tamper-resistant.
• Solid brass body; glass lens.
• Simple installation—only a 1/2" hole required.
• Suggested installation height: 60" from floor.
• Trim washer available, 3/4" x .032" thick.
• U700, U701 is UL Listed for use on fire door assemblies rated at 90 minutes.
• Conforms to ANSI/BHMA A156.16 L2322.
• Finishes: B4, B26D.

Knocker Dimensions:
Length: 4"
Width: 2-3/16"
Projection: 9/16"
Mounting Hole Center-to-Center: 3-7/32"

Door Knocker with Optional Viewers

02-3125 Knocker only
• Knocker made from wrought brass.
• Knocker Finishes: 605, 606, 609, 612, 613, 618, 619, 620, 625, 626.
• Viewers supplied in B4 or B26D.

02-31251 Knocker with 700 Viewer
02-31252 Knocker with 701 Viewer
• 120° Angle of View.
•700 For doors 1-3/8" to 2-1/16" thick.
•701 For doors 2-1/8" to 2-5/8" thick.
• Secure, tamper-resistant.
• Solid brass body; glass lens.
• Simple installation—only a 1/2" hole required.
• Suggested installation height: 60" from floor.
• Trim washer available, 3/4" x .032" thick.
• Conforms to ANSI/BHMA A156.16 L23173.
• Finishes: B4, B26D.

02-31251U Knocker with U700 Viewer
02-31252U Knocker with U701Viewer
• 120° Angle of View.
•U700 For doors 1-3/8" to 2-1/16" thick.
•U701 For doors 2-1/8" to 2-5/8" thick.
• Secure, tamper-resistant.
• Solid brass body; glass lens.
• Simple installation—only a 1/2" hole required.
• Suggested installation height: 60" from floor.
• Trim washer available, 3/4" x .032" thick.
• U700, U701 is UL Listed for use on fire door assemblies rated at 90 minutes.
• Conforms to ANSI/BHMA A156.16 L2322.
• Finishes: B4, B26D.

Knocker Dimensions:
Length: 5-15/16"
Width: 3"
Projection: 1-1/16"
Mounting Hole Center-to-Center: 3-15/16"