|
Select
type of Door stop, Bumpers and Holders ! |
|
FS13 Dome Stop
Features:
• Standard FS13 for use where no threshold is used.
• Heavy-Duty Cast Dome Stops constructed of brass.
• Unique riser design of R14 (below) allows easy
conversion to
threshold application.
• Units are packed with fasteners sufficient for
mounting in all types
of floor construction, including concrete.
• Meets ANSI/BHMA 156.6, L12141.
• Finishes: US3, US4, US10, US10B, US26 and US26D.
|
Dimensions:
Overall Height 1"
Base Height 5⁄32"
Base Diameter 13⁄4" round |
|
|
FS17 Dome Stop
Features:
• One piece dome stop for use with thresholds.
• Heavy-Duty Cast Dome Stops constructed of brass.
• Units are packed with fasteners sufficient for
mounting in all
types of floor construction, including concrete.
• Meets ANSI/BHMA 156.1, L12161.
• Finishes: US3, US4, US10, US10B, US26 and US26D.
|
Dimensions:
Overall Height 1-11⁄32"
Base Height 1⁄2"
Base Diameter 13⁄4" round |
|
|
R14 Riser
Features:
• Adapts the FS13 Dome Stop to threshold use.
• Brass Die Cast Construction.
• Meets ANSI/BHMA 156.1, L12161 when used with
FS13 Dome Stop.
• Finishes: US3, US4, US10, US10B, US26 and US26D.
|
Dimensions:
Height 5⁄16"
Base Diameter 13⁄4" round |
|
|
FS436 Dome Stop
• For doors without threshold.
• Heavy-Duty Cast Dome Stops constructed of brass,
bronze or aluminum.
• Gray, non-marring rubber bumper.
• Packed with wood screw and plastic anchor, specify
Tampin (TPN) or lead expansion shield (LS), if required.
• Meets ANSI/BHMA 156.6, L12141 for brass or bronze and
L32141 for aluminum.
• Finishes: US3, US4, US5, US10, US10B, US14, US15,
US15A, US26, US26D and US28.
|
Dimensions:
Overall Height 1"
Base Height 3/16"
Base Diameter 1-3/4" x 2" Oval |
|
|
R435 Riser
Features:
• Extruded aluminum, mill finish.
• For conversion of FS436 Dome Stop to carpet
installation.
• Packed with wood screws, lead shield and stud. Specify
Tampin (TPN) if required.
• Available in 1/4", 3/8", 1/2", 5/8", 3/4" and 1"
height.
|
Dimensions:
1" x 1-3/8" Oval
|
|
|
FS438 Dome Stop
• For doors with
threshold or undercut doors.
• Heavy-Duty Cast Dome Stops constructed of brass,
bronze or aluminum.
• Gray, non-marring rubber bumper.
• Packed with wood screw and plastic anchor, specify
Tampin (TPN) or lead expansion shield (LS), if required.
• Meets ANSI/BHMA 156.6, L12141 for brass or bronze and
L32141 for aluminum.
• Finishes: US3, US4, US5, US10, US10B, US14, US15,
US15A, US26, US26D, US28.
|
Dimensions:
Overall Height 1-3/8"
Base Height 9/16"
Base Diameter 1-3/4" x 2" Oval |
|
|
R437 Riser
Features:
• Extruded aluminum, mill finish.
• For conversion of FS438 Dome Stop to carpet
installation.
• Packed with wood screws, lead shield and stud. Specify
Tampin (TPN) if required.
• Available in 1/4", 3/8", 1/2", 5/8", 3/4" and 1"
height.
|
Dimensions:
1" x 1-3/8" Oval
|
|
|
