|
Select
type of Flush Bolt, Coordinator and Dust Proof Strikes ! |
|
Manual Flush Bolts
260 Series
Designed with face
plate rounded for simple, one-step router installation.
Steel bolt head in nylon bushing combined with dual
action spring
lock to hold bolt projected or retracted provides easy,
one-finger operation.
Economically priced for the volume builder.
Made from polished wrought brass.
Finishes: B3, B4, B5, B10, B10B, B14, B15, B15A, B19,
B26, B26D.
|
Dimensions:
Body Size: 3/4" Wide x 6-3/4" Long x 5/8"
Deep
Strike Size: 5/8" Wide x 1-1/2" Long
Rod Backset: 3/8"
Diameter of Bolt Head: 5/16"
Throw: 3/4"
|
|
|
Manual Flush Bolts
261 Series
An exceptionally smooth
working flush bolt with sharp, crisp lines.
Double action spring design provides automatic holding
of brass
bolt in projected or retracted position, and assures
ease of operation in conjunction with deep cup finger
hole.
Made from polished cast brass.
Finishes: B3, B4, B5, B10, B10B, B14, B15, B15A, B19,
B26, B26D. |
Dimensions:
Body Size: 3/4" Wide x 4" Long x 1-1/8"
Deep
Strike Size: 5/8" Wide x 1-1/2" Long
Rod Backset: 15/32"
Diameter of Bolt Head: 5/16"
Throw: 3/
|
|
|
Manual Flush Bolts
262 Series
An exceptionally smooth
working flush bolt with sharp, crisp lines
.
Double action spring design provides automatic holding
of brass
bolt in projected or retracted position, and assures
ease of
operation in conjunction with deep cup finger hole.
Made from polished cast brass.
Finishes: B3, B4, B5, B10, B10B, B14, B15, B15A, B19,
B26, B26D. |
Dimensions:
Body Size: 3/4" Wide x 6" Long x 1-11/32"
Deep
Strike Size: 7/8" Wide x 1-3/4" Long
Rod Backset: 15/32"
Diameter of Bolt Head: 1/2"
Throw: 1"
|
|
|
Manual Flush Bolts
263 Series
A compact flush bolt
designed specifically for easy, low cost
installation.
Rounded faceplate and lip for simplified installation.
Double action spring design provides automatic holding
of brass
bolt in projected or retracted position, and assures
ease of operation in conjunction with deep cup finger
hole.
Made from polished cast brass.
Finishes: B3, B4, B5, B10, B10B, B14, B15, B15A, B19,
B26, B26D. |
Dimensions:
Body Size: 3/4" Wide x 5" Long x 1-1/2"
Deep
Strike Size: 5/8" Wide x 1-1/2" Long
Rod Backset: 15/32"
Diameter of Bolt Head: 5/16"
Throw: 3/4"
|
|
|
Manual Flush Bolts
264 Series
A compact flush bolt
designed specifically for fast, low cost installation.
Same rounded faceplate and lip as the 263 Flush Bolt
for simplified installation.
Extra long lip permits installation in a variety of
door contraction designs
Double action spring design provides automatic holding
of brass
bolt in projected or retracted position, and assures
ease of operation in conjunction with deep cup finger
hole.
Made from polished cast brass.
Finishes: B3, B4, B5, B10, B10B, B14, B15, B15A, B19,
B26, B26D
|
Dimensions:
Body Size: 3/4" Wide x 4-1/2" Long x
1-3/4" Deep
Strike Size: 5/8" Wide x 1-1/2" Long
Rod Backset: 15/32"
Diameter of Bolt Head: 5/16"
Throw: 3/4"
|
|
|
Manual Flush Bolts
265 Series
A flush bolt with
radiused bottom faceplate designed specifically
for simple one-step router installation.
Double action spring design provides automatic holding
of brass
bolt in projected or retracted position, and assures
ease of operation in conjunction with deep cup finger
hole.
Faceplate is polished solid brass; bolt is made from
aluminum zinc alloy.
Finishes: B3, B4, B5, B10, B10B, B14, B15, B15A, B19,
B26, B26D.
|
Dimensions:
Body Size: 3/4" Wide x 6" Long x 1-7/16"
Deep
Strike Size: 7/8" Wide x 1-3/4" Long
Rod Backset: 1/2"
Diameter of Bolt Head: 1/2"
Throw: 1"
|
|
|
Manual Flush Bolts
266 Series
Same as the 265 Flush
Bolt except with square bottom faceplate.
Double action spring design provides automatic holding
of brass
bolt in projected or retracted position, and assures
ease of
operation in conjunction with deep cup finger hole.
Faceplate is polished solid brass; bolt is made from
aluminum zinc
alloy.
Finishes: B3, B4, B5, B10, B10B, B14, B15, B15A, B19,
B26, B26D. |
Dimensions:
Body Size: 3/4" Wide x 6" Long x 1-7/16"
Deep
Strike Size: 7/8" Wide x 1-3/4" Long
Rod Backset: 1/2"
Diameter of Bolt Head: 1/2"
Throw: 1"
|
|
|
FB256N, FB257N, and FB258N
Series for Metal Doors
When the active door is
opened, the lever can be moved to the up position,
retracting the bolt and allowing the inactive leaf to be
opened. When the inactive leaf is closed, the lever can
be moved to the down position, projecting the bolt
into the strike and securely locking the inactive leaf.
Simplified installation in metal frames. Round bolt
head requires only a punched hole. Use of strike
optional. Special design of guide and flat sided bolt
tip to prevent bolt rotation.
Non-handed.
Brass Finishes: B3, B4, B5, B10, B10B, B14, B15, B15A,
B26, B26D Bolt tip is 1/2" Diameter.
Bolts have 3/4" throw with a bolt backset of 3/4".
Standard Rod Length is 12", which is measured from the
center
of the flush bolt body to the bolt tip.
Meets ANSI/BHMA A156.16, L04251.
Optional Dust Proof Strikesprevents dirt build-up
assuring full
engagement of bottom bolt.
Optional rod lengths available: 6", 9", 18", 24", 30",
36" and 48".
Dimensions:
Body Size:
FB256N: 3/4" Wide x 6-3/8" Long x 1-1/8" Deep
FB257N: 1-1/4" Wide x 6-3/8" Long x 1-1/8" Deep
FB258N: 1" Wide x 6-3/8" Long x 1-1/8" Deep
Guide Size: 1" Wide x 2" Long x 5/64" Thick
Strike Size: 15/16" Wide x 2-1/4" Long x 5/64" Thick
|
|
|
FB358 Series for Wood Doors
When the active door is
opened, the lever can be moved to the up position,
retracting the bolt and allowing the inactive leaf to be
opened. When the inactive leaf is closed, the lever can
be moved to
the down position, projecting the bolt into the strike
and securely locking the inactive leaf.
Reduces installation costs; requires only simple
router mortise at top and bottom corners of doors.
Door strength and rigidity maintained by tying door
faces to reinforcing extensions on guide with machine
screws and bearing washers
UL Listed for Fire Doors. UL Listed 90 minutes on
8'0" x 10'0" Opening
Non-handed.
Brass Finishes: B3, B4, B5, B10, B10B, B14, B15, B15A,
B26, B26D.
Bolts have 3/4" throw with a 7/8" vertical adjustment.
Meets ANSI/BHMA A156.16, L04261.
Optional Dust Proof StrikesDP1 or DP2, prevents dirt
build-up assuring full engagement of bottom bolt.
Not available for rabbeted door installations.
Dimensions:
Body Size: 1" Wide x 6-3/4" Long x 1-3/8" Deep
Guide Size: 1" Wide x 2-1/2" Long x 5/64" Thick
Strike Size: 15/16" Wide x 2-1/4" Long x 5/64" Thick
|
|
|
FB457 and FB457N Series for Metal Doors
When the active door is
opened, the lever can be moved to the up position,
retracting the bolt and allowing the inactive leaf to be
opened. When the inactive leaf is closed, the lever can
be moved to
the down position, projecting the bolt into the strike
and securely locking the inactive leaf.
Simplified installation in metal frames. Round bolt
head requires only a punched hole. Use of strike
optional. Special design of guide and flat sided bolt
tip to prevent bolt rotation.
Non-handed.
FB457 UL Listed for Fire Doors. UL Listed 3 hours on
8'0" x 10'0" Opening
FB457N not UL Listed for Fire Doors.
Brass Finishes: B3, B4, B5, B10, B10B, B14, B15, B15A,
B26, B26D.
Bolt tip is 1/2" Diameter.
Bolts have 3/4" throw with a bolt backset of 3/4".
Standard Rod Length is 12", which is measured from the
center
of the flush bolt body to the bolt tip.
Meets ANSI/BHMA A156.16, L04251.
Optional Dust Proof Strikesprevents dirt build-up
assuring
full engagement of bottom bolt.
Optional rod lengths available for FB457: 6", 9", 18"
and 24".
Optional rod lengths available for FB457N: 6", 9",
18", 24", 30", 36" and 48".
Dimensions:
Body Size: 1-1/4" Wide x 6-3/4" Long x 1-1/8" Deep
Guide Size: 1" Wide x 2" Long x 5/64" Thick
Strike Size: 15/16" Wide x 2-1/4" Long x 5/64" Thick
|
|
|
FB458, FB458N and FB0458N
Series for Metal Doors
When the active door is
opened, the lever can be moved to the up position,
retracting the bolt and allowing the inactive leaf to be
opened. When the inactive leaf is closed, the lever can
be moved to
the down position, projecting the bolt into the strike
and securely locking the inactive leaf.
Simplified installation in metal frames. Round bolt
head requires only a punched hole. Use of strike
optional. Special design of guide and flat sided bolt
tip to prevent bolt rotation.
FB458 UL Listed for Fire Doors.
FB458N and FB0458N not UL Listed for Fire Doors.
FB0458N features 1/4" radius corners on body.
Non-handed.
Brass Finishes: B3, B4, B5, B10, B10B, B14, B15,
B15A, B26, B26D.
Bolt tip is 1/2" diameter.
Bolts have 3/4" throw with a bolt backset of 3/4".
Standard Rod Length is 12", which is measured from the
center
of the flush bolt body to the bolt tip.
Meets ANSI/BHMA A156.16, L04251.
Optional Dust Proof Strikesprevents dirt build-up
assuring full
engagement of bottom bolt.
Optional Rod Lengths available for FB458: 6", 9", 18"
and 24".
Optional Rod Lengths available for FB458N and FB0458N:
6", 9", 18",
24", 30", 36" and 48".
Dimensions:
Body Size: 1" Wide x 6-3/4" Long x 1-1/8" Deep
Guide Size: 1" Wide x 2" Long x 5/64" Thick
Strike Size: 15/16" Wide x 2-1/4" Long x 5/64" Thick
|
|
|
