|
WS20, WS20X
• Constructed in cast
brass.
• WS20 is furnished 3 countersunk mounting holes for
drywall mounting.
• WS20X is furnished with threaded stud for masonry type
mounting.
• Rubber bumpers feature off-set shoulder and threaded
shank that screws
into body of holder.
• Hinged strike furnished matches body material and
finish.
• WS20 meets ANSI/BHMA 156.16, L11341 WS20X meets
ANSI/BHMA
156.16, L11351
• Finishes: US3, US4, US10, US10B, US26, US26D.
|
WS20 Shown
Dimensions:
Base Diameter 2-3/8"
Overall Projection - 4"
Strike Height - 2"
Strike Width - 1" |
|
|
WS445
• Constructed in cast of
brass or aluminum.
• Unit functions as a stop but serves as a Hold-Open
device when hook is manually
engaged in strike.
• Unit requires manual disengagement to release
Hold-Open.
• Resilient, non-marring rubber tip.
• Packed with expansion shield and lead shield.
• Meets ANSI/BHMA 156.16, L11351 for brass and L31351
for aluminum.
• Finishes: US3, US4, US5, US10, US10B, US15, US15A,
US26, US26D.
|
Dimensions:
Base Diameter 2-1/4"
Base Projection - 3-11/16"
Engaged Projection
5-3/4"
Strike Height - 1-1/2"
Strike Width - 13/16"
Strike Projection - 13/16" |
|
|
WS449
• Constructed in cast of
brass or aluminum.
• Unit functions as a stop but serves as a Hold-Open
device when hook is manually engaged in strike.
• Unit requires manual disengagement to release
Hold-Open.
• Resilient, non-marring rubber tip.
• Packed with wood screws.
• Meets ANSI/BHMA 156.16, L11341 for brass and L31341
for aluminum.
• Finishes: US3, US4, US5, US10, US10B, US14, US15,
US15A, US26, US26D, US28.
|
Dimensions:
Base Diameter 2-1/4"
Base Projection - 3-11/16"
Engaged Projection
5-3/4"
Strike Height - 1-1/2"
Strike Width - 13/16"
Strike Projection - 13/16" |
|
|
