Order Ives Hardware: Buy Ives Hardware Online, Door Stops, Door Bumpers, Holders, Floor Stops, Angle Stops, Push Plates, Pull Plates, Latches, Catches, Surface Bolts

Select type of Door stop, Bumpers and Holders !

Floor Stops - Dome	Wall Bumpers	Plunger Type Door Holders
Floor Stops	Wall Stops	Kick Down Holders
Floor Stop & Manual Holders	Manual Wall Holders	Roller Bumpers
Floor Stop & Auto Holders	Automatic Wall Holders	Door Silencers
Residential Floor Door Stops	Residential Base Door Stops	Residential Hinge Pin Stops

FLOOR DOOR STOP AND MANUAL HOLDERS

FS446

• Manual type floor holder ideal for interior or exterior use.
• Cast brass or aluminum construction.
• Accommodates door undercut up to 2-1/2".
• Non-marring rubber tip.
• Unit functions as a stop but serves as a Hold-Open device when hook is manually engaged in strike. Unit requires manual disengagement to release Hold-Open.
• Packed with expansion shield and lead shield.
• Meets ANSI/BHMA 156.16, L11371 for brass and L31371 for aluminum.

• Finishes: US3, US4, US5, US10, US10B, US14, US15, US15A, US26, US26D, US28.

Dimensions:

Overall Height 3-3/4"
Height from Floor to Stop Center Line 2-5/8"
Stop Diameter 1-1/16"
Base Diameter 2-1/2"

FS450

• Manual type floor holder ideal for interior or exterior use.
• Cast brass or aluminum construction.
• Accommodates door undercut up to 2-1/2".
• Non-marring rubber tip.
• Unit functions as a stop but serves as a Hold-Open device when hook is manually engaged
in strike. Unit requires manual disengagement to release Hold-Open.
• Packed with wood screws.
• Meets ANSI/BHMA 156.16, L11361 for brass and L31361 for aluminum.

• Finishes: US3, US4, US5, US10, US10B, US14, US15, US15A, US26, US26D, US28.

Dimensions:

Overall Height 3-3/4"
Height from Floor to Stop Center Line 2-5/8"
Stop Diameter 1-1/16"
Base Diameter 2-1/2"

FS451

• Manual type door holder ideal for interior or exterior use.
• Cast brass construction.
• Strike features hinged hook which engages the holder.
• Accommodates door undercut up to 2-1/2".
• Resilient rubber tip.
• FS451-WS packed with wood screws.
• FS451 packed with expansion shield and tampin. Strike packed with sheet metal screws.
• FS451-WS meets ANSI/BHMA 156.16, L11361 for brass and L31361 for aluminum. FS451-WS
meets ANSI/BHMA 156.16, L11371 for brass and L31371 for aluminum.

• Finishes: US3, US4, US5, US10, US10B, US14, US15, US15A, US26, US26D, US28.

Dimensions:

Overall Height 3-3/16"
Base Depth 2-1/2"
Base Width 1-5/8"