|
RL30
Actuation is simple,
closing of the door causes the roller to fall in the
depression of the strike, thereby holding the door
closed.|
The projection of the roller is easily adjusted using
adjusting screws on the face of the unit.
Maximum projection of the roller is 3/8" allowing for
variance in the door clearance.
Nylon Roller Standard. Forged Brass Construction.
Meets ANSI/BHMA A156.16, E19091.
Optional RollerF Nylon covered brass roller.
Optional StrikeAASA
|
Dimensions:
Body: 1" Wide x 3-3/8" Long x 1-11/16"
Deep
Strike: 1-11/16" Wide x 2-1/4" Long x 5/32" Thick
Optional ASA Strike: STK726 (not shown): 1-1/4" wide x
4-7/8"
long x 3/32" thick |
|
|
|
|
RL32
Actuation is simple,
closing of the door causes the roller to fall in the
depression of the strike, thereby holding the door
closed.
The projection of the roller is easily adjusted by
turning
knurled knob on back of latch.
Maximum projection of the roller is 1/2" allowing for
variance in the door clearance.
Fits heavy-duty cylindrical lock cutout.
Nylon Roller Standard. Non-handed.
Brass or Stainless Steel Construction.
Meets ANSI/BHMA A156.16, E19101.
Optional StrikeAASA.
|
Dimensions:
Body: 1-1/8" Wide x 2-1/4" Long x 2-1/4"
Deep
Strike: 1-1/8" Wide x 2-3/4" Long x 3/32" Thick
Optional ASA Strike: STK726 (not shown): 1-1/4" wide x
4-7/8"
long x 3/32" thick |
|
|
RL36
Actuation is simple, closing of
the door causes the roller to
fall in the depression of the
strike, thereby holding the door
closed.
The projection of the roller
is easily adjusted by turning
slotted screw on back of latch.
Maximum projection of the
roller is 5/16" allowing for
variance in the door clearance.
Fits cylindrical lock cutout.
Nylon Roller. Non-handed.
Stainless Steel Construction.
Meets ANSI/BHMA A156.16, L17082.
Optional StrikeAASA.
|
Dimensions:
Body: 1"
Wide x 2-1/4" Long x 2" Deep
Strike: 1-1/8" Wide x 2-3/4"
Long x 3/32" Thick
Optional ASA Strike: STK726 (not
shown): 1-1/4" wide x 4-7/8"
long x 3/32" thick
|
|
|
RL38
Actuation is simple,
closing of the door causes the roller to fall in the
depression of the strike, thereby holding the door
closed.
The projection of the roller is easily adjusted by
turning slotted screw.
Maximum projection of the roller is 3/8" allowing for
variance in the door clearance.
Nylon Roller. Non-handed. Stainless Steel
Construction.
Meets ANSI/BHMA A156.16, L27092.
Finish: US32D
|
Dimensions:
Body: 2" Tall x 1-3/8" Wide x 7/8" Deep
Strike: 2-1/8" Tall x 1" Wide x 3/8" Deep |
|
|
RL1152
Combination of RL30
Roller Latch and Angle Stop.
Actuation is simple, closing of the door causes the
roller to fall in the depression of the strike, thereby
holding the door closed.
The projection of the roller is easily adjustable
using adjusting screws on the face of the unit.
Maximum projection of the roller is 3/8" allowing for
variance in the door clearance.
Nylon Roller Standard. Forged Brass Construction.
Finishes: US3, US4, US10, US10B, US26 and US26D.
|
Dimensions:
Body: 4-1/2" Tall x 1-1/2" Wide x 1-3/4"
Deep with 3/4" Angle
Strike: 2-1/4" Tall x 1-1/8" Wide x 5/32" Thick |
|
|
