Order Ives Hardware: Buy Ives Hardware Online, Wall Bumpers, Door Stops, Door Bumpers, Holders, Push Plates, Pull Plates, Latches, Catches, Surface Bolts

WALL BUMPERS

WS401 CVX & WS402 CVX
WS401 CCV & WS402 CCV

Features:
• Constructed in heavy-duty cast brass or aluminum base.

• Special retainer cup makes rubber tamper resistant.

• The WS401CVX unit is designed with a convex rubber bumper, packed with wood screw and plastic anchor.

• The WS401CCV unit is designed with a concave rubber bumper which avoids damage to locks with projecting buttons, packed with wood screw and plastic anchor.

• The WS402CVX unit is designed with a convex rubber bumper packed with screw and drywall anchor.

• The WS402CCV unit is designed with a concave rubber bumper which avoids damage to locks with projecting
buttons and is packed with screw and drywall anchor.

• WS401CVX & WS402CVX meets ANSI/BHMA 156.16 L12101 for brass and L32101 for aluminum.

• WS401CCV & WS402CCV meets ANSI/BHMA 156.16 L12251 for brass and L32251 for aluminum.

WS401 CVX & WS402 CVX

WS401 CCV & WS402 CCV

Dimensions:

Base Diameter - 2-1/2"
Base Thickness - 3/8"
Overall Projection - 1"

WS404CVX

Features:
• Constructed in cast brass.

• Compact size.

• Totally concealed mounting discourages vandalism or tampering.

• Unit furnished with grey convex rubber bumper.

• Packed with sheet metal screw, rawl plug and brad.

• Finishes: US3, US4, US5, US10, US10B,US15, US15A, US26, US26D, US28.

WS404CVX

Dimensions:

Base Diameter - 1"

Overall Projection - 17/32"

WS406CVX & WS407CVX
WS406CCV & WS407CCV

Features:
• Constructed in sturdy yet economical wrought base of brass, aluminum or stainless steel construction.

• Feature concealed tamper-proof mounting.

• Shipped factory preassembled backplate to reduce installation cost.

• Easy installation by inserting screwdriver through small hole in rubber.

• The WS406CVX unit is designed with a convex rubber bumper, packed with wood screw and plastic anchor.

• The WS406CCV unit is designed with a concave rubber bumper, which avoids damage to locks with projecting buttons, packed with wood screw and plastic anchor.

• The WS407CVX unit is designed with a convex rubber bumper packed with screw and drywall anchor.

• The WS407CCV unit is designed with a concave rubber bumper which avoids damage to locks with projecting buttons and is packed with screw and drywall anchor.

• WS406CVX & WS407CVX meets ANSI/BHMA 156.16 L22201 for brass, L42101 for aluminum and L52101 for stainless steel.

• WS406CCV &WS407CCV meets ANSI/BHMA 156.16 L22251 for brass and L42251 for aluminum, and L52251 for stainless steel.

WS406 CVX & WS407 CVX

WS406 CCV & WS407 CCV

Dimensions:

Base Diameter - 2-1/2"
Base Thickness - 3/8"
Overall Projection - 1"

411R

Features:
• Adhesive-backed wall door stop for use on clean, smooth, flat surfaces only.

• Non-marring rubber available in gray or white.

• Concave design permits knob to strike stop without damaging or engaging lock mechanism.

• Finishes: W (white rubber).

411R

Dimensions:

Base Diameter - 1-7/8"

Base Thickness - 3/8"

Overall Projection - 1-1/16"