|
WS11, WS11X
• Constructed in heavy
duty cast brass.
• WS11 is furnished with 3 countersunk mounting holes
for drywall mounting.
• WS11X is furnished with a threaded stud and expansion
shield for masonry type mounting.
• Hexagon section on unit aids in fastening unit when
expansion shield is used.
• Rubber bumpers features off-set shoulder and threaded
shank that screws into body of unit.
• WS11 meets ANSI/BHMA 156.16, L12011 WS11X meets
ANSI/BHMA 156.16, L12021.
• Finishes: US3, US4, US10, US10B, US26, US26D.
|
Dimensions:
Base Diameter - 2"
Overall Projection - 3-3/4" |
|
|
WS33, WS33X
• Constructed in a
durable cast brass.
• Sturdy rubber bumper with offset shoulder screws into
cavity on body to prevent loss or theft.
• Sloping design discourages vandalism
• WS33 is furnished with 3 mounting holes for drywall
mounting.
• WS33X is furnished with a threaded stud and expansion
shield for masonry type mounting.
• Finish: US26D.
|
Dimensions:
Base Height- 3"
Base Width - 2-1/4"
Overall Projection - 3-3/4" |
|
|
WS65
• Burnished cast
aluminum.
• Non-marring rubber bumper.
• Packed with sheet metal screws.
• Finishes: US3, US10AL, A10B, US27.
|
Dimensions:
Base Diameter - 1-5/8"
Overall Projection - 3-3/4" |
|
|
WS443
• Constructed in brass.
• Ideal for interior or exterior use.
• Non-marring rubber tip.
• Packed with expansion shield and lead shield.
• Meets ANSI/BHMA 156.16, L12021 for brass and L32021
for aluminum.
• Finishes: US3, US4, US5, US10, US10B, US14, US15,
US15A, US26, US26D, US28.
|
Dimensions:
Base Diameter - 2-1/4"
Overall Projection - 3-11/16" |
|
|
WS447
• Constructed in brass or
aluminum.
• Ideal for interior or exterior use.
• Non-marring rubber tip.
• Furnished with 3 mounting holes for drywall mounting.
• Packed with wood screws.
• Meets ANSI/BHMA 156.16, L12011 for brass and L32011
for aluminum.
• Finishes: US3, US4, US5, US10, US10B, US14, US15,
US15A, US26, US26D, US28.
|
Dimensions:
Base Diameter - 2-1/4"
Overall Projection - 3-11/16" |
|
|
