5100
Electric Strike
The Von Duprin 5100 Electric Strike has been designed
and manufactured to meet
the needs of locksmiths and security professionals. This
easy-to-install electric strike
was created for medium duty applications, specifically to
control traffic flow through
interior and exterior openings in retail and commercial
environments.
Three faceplates included for hollow metal, wood or aluminum
frames.
Internal 12/24 dual-voltage solenoid.
Adjustable keeper. Fail-safe/fail-secure select ability.
Durability:
Developed with Von Duprins high standards and engineering
expertise.
Heavy-duty construction. Tamper resistant design.
Tested to over one million cycles. 1300 lbs. holding strength.
The solenoid has four wires, allowing you to configure the strike at the
job site so you can
use it in either 12 or 24 volt DC applications.
The 5100 Electric Strike is easily changeable between fail-safe and
fail-secure in
the field without the need for additional parts.
The 5100 Electric Strike has a 1/8" horizontally adjustable keeper. This
mechanism,
which is designated by the dark gray region of the diagram, allows
the installer
to adjust the strike where a door and frame are not properly aligned
or where
weather stripping is causing too much pressure on the strike.
Non-handed Can be used for doors opening in either direction.
Warranty Standard Von Duprin 1 year electrical product
warranty.
DIMENSIONS:
Back box: 3-3⁄8" x 1" x 1-11⁄32"
Overall Strike Depth: 1-11⁄16"
Faceplates: 4-7⁄8" round corner
ANSI A115.2 standard frame prep
4-7⁄8" square corner ANSI A115.2 standard frame prep
7-15⁄16" long, round corner wood frame prep
Keeper pocket: 1-7⁄16"L x 1⁄2"D x 11⁄16" - 13⁄16"W (adjustable). Lip
Attachment cut-out depth: 11⁄16"
